Global Patient Monitor
Compatibility Matrix
Directly cross-reference 2,000+ proprietary tooling dies and 472+ verified pinout schematics. Engineered for hospital biomedical equipment directors requiring exact keyway alignment, dielectric shielding, and zero signal drift.
Brand Compatibility Hub
Verify instant pinout, mold matching, and clinical form factors across 12+ international bedside monitor brands.
| Clinical Category | Interface Specification | Molds Opened | Status |
|---|---|---|---|
SpO2 Sensors | D-Sub 8-pin / 12-pin Direct & Adapter | 42 Molds | 100% In Stock & Cleared |
ECG & EKG Cables | 12-pin Trunk & 3/5/10-Lead AHA/IEC | 36 Molds | 100% In Stock & Cleared |
NIBP Cuffs & Hoses | Quick-Lock Snap Coupler (Zero-Leak) | 28 Molds | 100% In Stock & Cleared |
IBP Transducer Kits | 12-pin Round Connector (BB-103) | 16 Molds | 100% In Stock & Cleared |
Temperature Probes | 2-pin Round YSI 400 Series Compatible | 14 Molds | 100% In Stock & Cleared |
Core Clinical Form & Spec Matrix
Physical form factors, patient weight bands, conductor metallurgy, and regulatory clearances spanning Medke's 5 monitoring product categories.
Disposable Sensors
Single-Patient Use- Weight Bands & Sites4 ClassesAdult (>40kg, index finger), Pediatric (10-50kg), Infant (3-20kg, great toe), Neonate (<3kg, foot sole/palm).
- Adhesive Foam SubstrateClosed-Cell PEMicro-porous hypoallergenic acrylic adhesive with total optical light barrier preventing phototherapy interference.
- Velcro Sponge WrapNICU GentleNon-adhesive gentle polyurethane sponge with adjustable Velcro tab designed for fragile, skin-breakdown prone neonates.
- Specialty Forehead PatchLow PerfusionSupraorbital artery site sensor delivering stable plethysmographic signals during severe peripheral vasoconstriction.
Reusable Sensors
8 Clinical Forms- P9 & P7 Hard ClipsABS Medical ShellP9 Adult Hard Clip and P7 Pediatric Hard Clip with calibrated stainless steel hinge springs and ergonomic finger grip pads.
- P8 & P6 Soft Tips100% LSR SiliconeP8 Adult and P6 Pediatric liquid silicone rubber boots with biocompatible non-latex contact and pressure-sore prevention.
- P5 & P4 Flexible FormsNeonate / Y-TypeP5 Neonate silicone wrap with locking strap; P4 Multi-site Y-sensor with convertible silicone tie / ear clip attachments.
- P3 Ear & PA VeterinarySpecialty ClampsP3 Adult high-sensitivity earlobe clip; PA Veterinary lingual/ear clip with dual spring tension for clinical animal care.
Adapter Cables
Dual-Shielded TPU- Cable Length Matrix1.0m / 2.4m / 3.0mPrecision-engineered extension cords with low-attenuation tinned copper conductors and Kevlar tensile reinforcement.
- Shielding Metallurgy>98% Braided CoverageDouble-layer foil plus tinned copper braided mesh shielding protecting high-gain photodiode currents from 50/60Hz noise.
- Mechanical Reliability>50,000 Flex CyclesStrain relief boots molded with medical Santoprene elastomer withstanding severe 90-degree oscillatory bending stress.
- Connector Plating30μ Gold PlatingMicro-polished gold-plated phosphor bronze terminal pins ensuring insertion life exceeding 5,000 mating cycles.
Patient Terminations
5 Terminal Types- 4.0mm Snap SocketStandard StudHigh-retention beryllium copper spring mechanism ensuring solid snap engagement with all ANSI/AAMI disposable electrodes.
- Grabber / Pinch MechanismSurgical ClawSpring-loaded clamp jaw delivering constant 120g gripping force without slipping during intense patient mobilization.
- Dual-Purpose ClampSnap + Tab HybridUniversal hybrid clamp head seamlessly accommodating both round snap studs and flat disposable electrode tabs.
- Banana & DIN 42802Gold Lantern Petals4.0mm Banana plug with resilient gold lantern springs (<0.2Ω contact resistance) and 3.0mm DIN needle sockets per DIN 42802.
Cable Systems
Defib Proof- One-Piece Direct Cables3 & 5-Lead MoldedHermetically ultrasonic welded junction yolk blocks preventing chemical ingress during high-level disinfection wipe-downs.
- Trunk & Detachable Leads3/5/6/10/12-LeadModular trunk architecture with low-insertion-force multi-pin yolk connectors for cost-effective single-lead replacement.
- Defibrillation ResistorsBuilt-in 10kΩPrecision 10kΩ current-limiting protection resistors integrated into leadwire hubs to protect patients from RF electrosurgical burns.
- Diagnostic EKG & Holter10-Lead RestingDiagnostic 10-lead cables for resting electrocardiographs and ultra-flexible lightweight leads for 24-48h Holter recorders.
Color & Standards
AHA & IEC Dual- AHA (AAMI) StandardUS / AmericasWhite (RA), Black (LA), Red (LL), Green (RL), Brown (V1-V6) with permanent laser-etched anatomical text marking.
- IEC StandardEurope / InternationalRed (R), Yellow (L), Green (F), Black (N), White (C1-C6) ensuring zero cross-connection error in global ICU environments.
- Noise Suppression JacketCarbon-CoatedSemi-conductive carbon layer surrounding core copper strands, eliminating triboelectric noise generated by patient movement.
- Dielectric Voltage Withstand5,000V DielectricHigh-voltage defibrillation withstand rating up to 5,000V DC per ANSI/AAMI EC53 without dielectric breakdown.
Disposable Neonatal
Sizes 1# to 5#- 5-Color Coding System3.0cm to 15.0cm1# (3.1-5.7cm, Orange), 2# (4.3-8.0cm, Teal), 3# (5.8-10.9cm, Green), 4# (7.1-13.1cm, Navy), 5# (8.5-15.0cm, White).
- Ultrasonic TPU WeldingSeamless EdgeMedical pure TPU bladder ultrasonically fused with soft non-woven fabric. 100% Latex-free and DEHP-free biocompatibility.
- Index & Range MarkersFail-Safe GuideHigh-contrast arterial line and arm circumference range markings ensuring accurate oscillometric pulse detection.
- Lumen ConfigurationsSingle & Dual TubeAvailable in both single-lumen micro luer and dual-lumen barb connectors for compatibility with neonatal bedside monitors.
Reusable Cuffs
Infant to Thigh 66cm- C6 Bladderless SeriesAntimicrobial PUIntegrated one-piece coated polyurethane cuff with no internal bladder. Fully submersible in bleach and quaternary ammonium.
- C1/C2 Nylon SeriesRemovable BladderHigh-denier abrasion-resistant woven nylon outer casing with durable pull-out TPU internal air chamber.
- Burst Pressure Rating≥600 mmHgUltrasonic welded perimeter seams withstand over 600 mmHg inflation pressure without rupture (exceeds ISO 81060-1).
- Velcro Fatigue Life>10,000 CyclesIndustrial-grade hook-and-loop fastening system maintaining >85% retention strength after 10,000 repeated cycles.
Connectors & Hoses
FDA K242623- Pneumatic Quick Couplers30+ MoldsPrecision brass nickel-plated and medical POM couplers compatible with Philips snap, GE screw-lock, Mindray push, Colin.
- Zero-Leakage Sealing<1 mmHg / minAutomated pressure-decay decay testing ensures leak rate <1.0 mmHg over 5 minutes under 300 mmHg static pressure.
- Reinforced TPU HosesKink-Resistant1.5m, 2.5m, and 3.0m heavy-wall medical polyurethane hoses resisting compression and pulse signal dampening.
- FDA 510(k) ClearanceK242623 ApprovedOfficially cleared under FDA 510(k) K242623 for adult, pediatric, and neonatal hospital blood pressure measurement.
Disposable Transducers
BB-101 to BB-105- Platform Line Compatibility5 Industry StandardsBB-101 (Abbott/Medex), BB-102 (Edwards Lifesciences), BB-103 (Philips/B.Braun), BB-104 (BD), BB-105 (Utah Medical).
- Silicon Piezoresistive Chip5.0 µV/V/mmHg ±1%Solid-state micro-machined piezoresistive silicon bridge delivering ultra-linear physiological pressure conversion.
- Measurement Range-50 to +300 mmHgBroad dynamic pressure range (-6.6 to +40 kPa) supporting arterial (ART), central venous (CVP), and pulmonary wedge (PAWP).
- Sterile PresentationEO Sterile PackIndividually packaged in medical Tyvek peel pouches, Ethylene Oxide (EO) sterilized with 3-year verified shelf life.
Dual Flush Architecture
3 ml/h Continuous- Continuous Micro-Flush3.0 ± 1 ml/hPrecision ceramic flow restrictor maintaining continuous 3ml/h heparinized saline infusion to prevent catheter lumen occlusion.
- Fast Flush ValveHigh Flow RapidErgonomic pull/squeeze silicone flush valve enabling instantaneous fast flushing and dynamic square-wave response verification.
- Fluid Channel TransparencyOptical Clear PCCrystal-clear medical polycarbonate housing with zero dead-space geometry ensuring rapid, bubble-free priming.
- Stopcocks & TubingNon-CompliantIncludes color-coded 3-way stopcocks and high-durometer non-compliant pressure monitoring lines preventing pulse wave damping.
Interface Cables
40+ Host Pinouts- Monitor Host Direct Plugs40+ Monitor ModelsCompatible interface cables for Philips 12-pin, GE 11-pin, Mindray 12-pin, Dräger 7-pin, Nihon Kohden 14-pin, Spacelabs.
- ESU Noise RejectionDouble Metal BraidHigh-coverage tinned copper double braid effectively shielding sensitive 5μV signals against electrosurgical cutting noise.
- Zero Drift Baseline<1 mmHg / 8hUltra-stable thermal compensation circuitry maintaining baseline pressure drift <1.0 mmHg throughout 24-hour ICU monitoring.
- Cable Jacket DurabilityMedical PolyurethaneHighly flexible, halogen-free medical TPU jacket resistant to alcohol, betadine, and enzymatic disinfectant detergents.
Reusable Probes
IPX7 Immersion Proof- Skin Surface Probeφ9.8mm Flat DiscMirror-polished medical 316L stainless steel flat disc delivering high thermal conductivity and rapid response time (τ ≤ 2.5s).
- Body Cavity Probeφ4.0mm / φ3.0mmSeamless rounded bullet tip in Adult (φ4.0mm) and Pediatric (φ3.0mm) calibers for non-traumatic esophageal and rectal monitoring.
- IPX7 Waterproof SealingLiquid DisinfectableHermetically epoxy-encapsulated sensor head fully compliant with IPX7 immersion requirements for glutaraldehyde soaking.
- Strain Relief Construction>1,000 Wipe CyclesReinforced flex boots molded with medical Santoprene elastomer preventing core wire fracture at the sensor transition point.
Disposable Probes
Single-Patient Clinical- Skin Radiant Heat PatchReflective AluminumMylar-backed reflective aluminum foil foam patch reflecting ambient operating room lighting and radiant warmer heat.
- Depth-Marked Cavity ProbeGraduated MarkingsClear centimeter graduations (5cm to 30cm) along the medical PVC sheath for precise anatomical depth placement.
- Esophageal StethoscopeAudio + TemperatureCombined acoustic diaphragm and core temperature thermistor enabling continuous cardiopulmonary auscultation during surgery.
- Foley Catheter IntegrationBladder TemperatureTemperature-sensing Foley catheter adapters providing continuous urinary bladder core body temperature monitoring in the ICU.
Standards & Clearances
FDA K243000- YSI 400 & 700 Dual Standard2252Ω & Dual NTCCompatible with YSI 400 series (2252Ω at 25°C) and YSI 700 series dual thermistor bridge monitors.
- Clinical Accuracy±0.1°C (25°C-45°C)Calibrated precision conforming strictly to ISO 80601-2-56 across the critical physiological range 25.0°C to 45.0°C.
- FDA 510(k) ClearanceK243000 ApprovedOfficially cleared under FDA 510(k) K243000 for continuous human temperature monitoring in operating rooms and ICUs.
- Biocompatibility TestingISO 10993 PassedPassed rigorous ISO 10993 cytotoxicity, intracutaneous irritation, and delayed-type hypersensitivity safety certifications.
3-Step Biomedical Engineering Protocol
How hospital clinical engineers verify replacement cable compatibility before procurement or trial deployment.
Inspect Physical Port & Host Model Plate
Locate the monitor front-end module or side-panel jack label. Note connector outer diameter and internal polarizing ridge orientation.
Verify Anti-Mismatch Keyway Notch & Pin Count
Match pin geometry against Medke engineering CAD drawings. Our molds feature proprietary keyway notches ensuring zero socket forcing.
Request Pre-Production Sample or Pinout Dossier
Evaluate functional samples with 100% factory dielectric inspection reports and ISO 10993 biological safety certificates.
Medke Master Cross-Reference Handbook (472+ Models)
Instant access to our comprehensive engineering matrix containing exact OEM part numbers, pinout wiring diagrams, mold tolerances, and distributor pricing brackets.
Zero Signal Drift & Mechanical Integrity Guarantee
Engineered to deliver electrical parameter parity with original factory cables while safeguarding clinical monitor receptacles.
Zero Signal Drift Parity
Impedance-matched coaxial cores eliminate waveform attenuation, baseline wander, and electrosurgical unit (ESU) radiofrequency artifacts.
±0.02mm Pin Mating Tolerance
Precision beryllium copper and phosphor bronze contact pins prevent mechanical socket stretching and gold-finger abrasion.
ISO 10993 Biocompatibility
Medical-grade thermoplastic elastomer (TPE) and TPU jackets certified for cytotoxicity, sensitization, and clinical disinfectant wipes.
1,500V Dielectric Tested
100% high-voltage dielectric insulation tested before packaging, guarding patients and monitors against electrical discharge.
Working with an unlisted or obsolete monitor port?
Our mold development laboratory houses over 1,500 historical connector dies dating back to 2008. If your clinical device is out of production or unlisted above, send us a photograph of the connector port for immediate engineering cross-match within 2.4 hours.
Direct Engineering Verification
Snap a clear photo of the side-panel port or existing damaged cable connector:
WhatsApp Photo to Engineer (+86 153 0265 4212)Email Blueprint to contact@medke.com