Department-Tailored Monitoring Accessories for Critical, Surgical & General Care
Eliminate signal artifacts, avoid OEM cost markups, and protect patients against nosocomial cross-contamination. Medke delivers validated, plug-and-play monitoring cables and sensors engineered to match 100+ OEM monitor fleets across six dedicated clinical environments.
Clinical Department Monitoring Hub
Each hospital unit operates under unique clinical constraints—from continuous 24/7 hemodynamic stress in the ICU to high-frequency electrosurgical noise in the OR. Explore tailored accessory architectures below.

- High patient movement causing false SpO2 disconnect alarms and baseline wander in continuous telemetry.
- Frequent defibrillation events risking electrosurgical burn or monitor front-end electrical damage.
- High risk of cross-contamination across immunocompromised long-stay ICU patients.
Medke Clinical Engineering Countermeasures
Direct technical mitigations engineered to eliminate signal noise, contact failure, and cross-infection risks.
- Kevlar-reinforced dual-shielded TPU cables with high signal-to-noise ratio and fast motion artifact recovery.
- Built-in 3,000V dielectric isolation and defibrillator-proof 10k-ohm protection resistors inside trunk cables.
- Single-patient disposable foam & soft fabric SpO2 sensors preventing pathogen transfer.
Certified plug-and-play matching for primary ICU monitoring platforms:
Department Bundled Kits & Bill of Materials
Simplify procurement, streamline nurse cart restocking, and secure volume discounts. Each turnkey kit includes pre-matched multi-parameter sensors and adapter trunks for clinical beds.
Adult ICU Bedside Multi-Parameter Kit
Designed for continuous multi-parameter telemetry in intensive care units and coronary care wards.
- Reusable SpO2 Adult Finger Clip SensorQty: 2 Pcs
- Single-Patient Disposable SpO2 Foam WrapsQty: 20 Pcs
- 5-Lead Shielded ECG Trunk Cable & LeadsQty: 2 Sets
- Dual-Tube Reusable & Disposable NIBP CuffsQty: 5 Cuffs
- Dual-Channel Invasive Blood Pressure (IBP) CableQty: 1 Set
- General Purpose Skin / Esophageal Temp ProbeQty: 2 Pcs
Surgical Intraoperative Monitoring Pack
Engineered to eliminate electrosurgical knife interference during complex surgical interventions.
- Diathermy-Shielded 5-Lead ECG CableQty: 2 Sets
- Sterile Single-Patient Disposable SpO2 SensorQty: 25 Pcs
- Sterile IBP Disposable Transducer Lead InterfaceQty: 10 Sets
- Reusable Dual-Surface ESU Patient Return PlateQty: 2 Plates
- Bipolar Electrosurgical Forceps CableQty: 2 Cables
- Tympanic & Central Core Temperature SensorQty: 4 Pcs
Neonatal Delicate Care Specialized Bundle
Customized for ultra-fragile preterm infants, prioritizing zero epidermal tear and micro-circulation tracking.
- Soft-Foam Non-Adhesive Neonatal Y-SpO2 WrapsQty: 30 Pcs
- 3-Lead Neonatal Din-Click Soft Wire ECG SetQty: 5 Sets
- Micro-Scale TPU Neonatal NIBP Cuffs (Sizes 1–5)Qty: 10 Cuffs
- Reflective Incubator Skin Temperature Micro-SensorQty: 5 Pcs
- Silicone Gel Fixing Straps for Pediatric LimbsQty: 20 Straps
- Pediatric Dual-Wavelength Extension AdapterQty: 2 Cables
Clinical Biocompatibility & Material Safety
Direct patient-contact accessories tested and certified according to stringent international regulatory frameworks. Zero compromise on patient safety or long-term skin health.
ISO 10993 Biological Safety
Full biocompatibility evaluation conducted by certified labs. Passed ISO 10993-5 (In Vitro Cytotoxicity: Grade 0), ISO 10993-10 (Skin Sensitization), and ISO 10993-23 (Skin Irritation: Zero reaction).
Grade 0 Non-Cytotoxic100% Latex & DEHP Free
All raw materials free of natural rubber latex and phthalate plasticizers (DEHP-free). Eliminates contact dermatitis, Type I allergic anaphylaxis, and chemical leaching during critical therapy.
EU REACH & RoHS CompliantMedical TPU + Kevlar Armor
Extruded with medical-grade thermoplastic polyurethane jacketing resistant to hospital disinfectant wipes (alcohol, bleach, quaternary ammonium). Internal DuPont Kevlar core withstands >15kg pull.
> 10,000 Bend Cycles Tested3,000V Dielectric Isolation
Every production batch undergoes 100% 3,000V AC Hipot insulation testing. Integrated defibrillator protection resistors safeguard both patient monitor inputs and internal circuitry.
IEC 60601-2-27 CertifiedAudited and verified by TÜV SÜD Product Service GmbH (Notified Body 0123) and listed under US FDA QSR 21 CFR Part 820.




Why Hospital Procurement & BME Teams Choose Medke
OEM monopoly markups drain critical hospital operational budgets. Medke provides certified, engineering-grade sensor alternatives that maintain identical clinical sensitivity while reducing departmental cost.
Direct Budget Optimization
Cut routine sensor replenishment expenditure in half without sacrificing waveform fidelity or alarm responsiveness. Reallocate savings into core capital equipment.
Universal Multi-Brand Fleet
Consolidate hospital inventory across Philips IntelliVue, GE Carescape, Mindray BeneVision, Dräger, and Nihon Kohden using Medke universal adapter trunks.
Agile Supply Continuity
Avoid 8–12 week OEM factory backorders. Medke buffers 500+ standard hospital SKUs in Shenzhen warehouse hubs for immediate dispatch via DHL, FedEx, or air cargo.
Full Batch Traceability & Warranty
Comprehensive 12-month replacement warranty on reusable sensors. Every unit laser-etched with unique batch lot serials linked to 10-year Device Master Records (DMR).
Request a Tailored Departmental Solution & Compatibility Dossier
Whether outfitting a new 500-bed clinical tower or standardizing sensor replenishment across existing monitor fleets, our Shenzhen medical engineering desk provides detailed compatibility matrices and volume quotation within 24 hours.
- Pinout & DFM Verification: Free technical evaluation of your specific monitor interface connectors.
- Clinical Evaluation Samples: Free evaluation units shipped to accredited hospital BME departments.
- Regulatory Package: Official TÜV SÜD CE MDR declaration, ISO 13485 certificates and FDA 510(k) summary copies provided.